Leawood USA
  • Address

    617503 Crooked Arrow Dr. Sugar Land, TX 77498

  • Phone

    346-332-7928

  • Address

    617503 Crooked Arrow Dr. Sugar Land, TX 77498

  • Phone

    346-332-7928

Slips

SLIPS

Drilling Technologies > Pipe Handling Tools > Slips > DU Rotary Slips

DU Rotary Slips are for use in API insert bowls. The DU Regular has a gripping surface of 12" long and is for wells 8,000 feet and less. The DU Long has a gripping surface of 16" and is designed for deep wells and heavy drill strings.

Small pyramids on the gripping surface of the die provide a positive hold that helps reduce damage to the pipe. The non-continuous gripping surface pattern minimizes stress concentration. Body segments are firmly locked by a floating hinge that holds them in a vertical alignment, yet allows them to adjust laterally to irregularities in the master bushing taper bore. This helps assure uniform grip on the pipe and adjusts for wear or other misalignment.

Available Versions:

Size Version From To
4 1/2" DU long and DU regular with size range from 4 1/2" 1"
5 1/2" DU long and DU regular with size range from 5 1/2" 2 3/8"
7" DU regular with size range from 7" 4 1/2"
Drilling Technologies > Pipe Handling Tools > Slips > SDU Rotary Slips

SDU Rotary Slips are designed for deep wells and heavy drilling strings. The SDU is an outstanding rotary slip for use with extended taper master bushings. SDU Rotary Slips are quality, heat treated steel construction and are capacity rated to API specifications.

Available Versions:

Size Version From To
5 1/2" SDU with size range 5 1/2" 2 3/8"
7" SDU with size range 7" 4 1/2"
Drilling Technologies > Pipe Handling Tools > Slips > SDXL & SDML Rotary Slips

SDXL and SDML rotary slips are for use in API standard insert bowls. They feature better contact and distribution of load on the drill pipe through a wraparound configuration insert design. These slips help prevent bottlenecking and gouging damage. The body segments buttressed design provides strength while minimizing weight for ease of handling. The SDXL and SDML provide long, trouble free service under the most severe conditions. Inserts are changed by removing the nut and bolts in the insert retainer at the top of the die slot.

Available Versions:

Size Version From To
5 1/2" SDXL with range from 5 1/2" 4 1/2"
5" SDXL with range from 5" 4"
4 1/2" SDXL with range from 4 1/2" 3 1/2"
5" SDML with range from 5" 4"
4 1/2" SDML with range from 4 1/2" 3 1/2"
3 1/2" SDML with range from 3 1/2" 2 3/2"
Drilling Technologies > Pipe Handling Tools > Slips > Type B Long Woolley Rotary Slips

The Type B Long Woolley Rotary Slip is designed for wells in the range of 8,000 to 15,000 foot depths. This slip provides a 16" gripping length with 24 inserts. Type B Long Woolley Rotary Slip slips are quality, heat treated steel construction and are manufactured to API specifications.

Size range: 4 1/2" through 2 1/16"

Drilling Technologies > Pipe Handling Tools > Slips > Type XL Woolley Rotary Slips

The Type XL Woolley Rotary Slip is designed for heavy loads and has proved remarkably effective in holding true alignment under loads in excess of 28,500 feet of pipe. It has an exceptionally wide and deep support area or slip back for maximum contact with extended-taper bowls in the master bushing on pin-type rotary drives. The Type XL Woolley Rotary Slip has a 16" gripping surface with 24 inserts. Type XL Woolley Rotary Slip slips are quality, heat treated steel construction and are manufactured to API specifications.

Size range: 5" through 4"

Drilling Technologies > Pipe Handling Tools > Slips > LD 1000 ton Rotary Slips

The LD Type 1000 Ton Rotary Slips incorporates some unique and innovative features. It is designed to address the problems that can arise from ever increasing drill string loads now being encountered in deep water drilling.

Features & Benefits:

  • Each insert rests on its own independent ledge and in this way the load is more evenly distributed over the full vertical height of all inserts in the slip.
  • Reduces the importance of the slip toe, thereby reducing the possibility of slip toe failure.
  • Allows the full insert contact area to be retained, thus reducing the possibility of crushing the pipe.
  • Comes with a floating hinge pin design which allows the three slip segments to move individually and equally towards the center of the pipe.
  • All segments to transmit equal forces towards the center of the drill pipe as the string weight increases.
  • The LD has a 16" gripping surface with 24 special designed inserts.

LD Type 1000 Ton Rotary Slips are quality, heat-treated steel construction and are capacity rated to API specifications.

Size Range: 7" through 4 1/2"

Drilling Technologies > Pipe Handling Tools > Slips > LDXL 1000 ton Rotary Slips

The LDXL Type 1000 Ton Rotary Slip incorporates some unique and innovative features. It is designed to address the problems that can arise from ever increasing drill string loads now being encountered in deep water drilling.

In the LDXL Type 1000 Ton Rotary Slip, each insert rests on its own independent ledge and in this way the load is more evenly distributed over the full vertical height of all inserts in the slip. This design reduces the importance of the slip toe, thereby reducing the possibility of slip toe failure.

The design of the LDXL Type 1000 Ton Rotary Slip allows the full insert contact area to be retained, thus reducing the possibility of crushing the pipe.

The LDXL Type 1000 Ton Rotary Slip comes with a floating hinge pin design which allows the three slip segments to move individually and equally towards the center of the pipe. This allows all segments to transmit equal force towards the center of the drill pipe as the string weight increases.

The LDXL Type 1000 Ton Rotary Slip has a 20" gripping surface with 30 special designed inserts.

LDXL Type 1000 Ton Rotary Slips are quality, heat-treated steel construction and are capacity rated to API specifications.

Size Range: 7" through 4 1/2"

Capacity: 1000 ton

Drilling Technologies > Pipe Handling Tools > Slips > XP-1000 Ton Rotary Slip

The XP-1000 Ton Rotary Slip is designed to support ultra-high loads associated with critical deep water and deep well operations. The unique design facilitates equal loading by incorporating machine grooves in the slip body and mating load supporting inserts. As a result, the string weight is distributed equally throughout the slip body as opposed to point loading the slip in the toe. This is a feature all conventional slips possess. Transverse load effect (the root cause of slip crushing) is substantially reduced by modifying the geometry of an existing slip design. The combination of the new taper and the extended contact area increases the safe load capacity 173% when compared to conventional slips.

XP-1000 Ton Rotary Slip are quality, heat-treated steel construction and are capacity rated to API specifications.

Size Range: 7" through 4 1/2"

Capacity: 1000 ton

Drilling Technologies > Pipe Handling Tools > Slips > CMS-XL Casing Slip

The CMS-XL Casing Slip is designed to stand up to the most severe service. The self-centering, full wrap around grip holds positively while preventing damage to even thin wall casing. By varying the circular button size and adding or removing body segments, casing from 6 5/8" to 36" OD can easily be accommodated. The segments are made of alloy steel, are heat treated for strength and wear resistance, and machined to strict quality controlled standards.

Drilling Technologies > Pipe Handling Tools > Slips > CMS-3 Casing Slip

The CMS-3 Casing Slip is designed to be used with 3" taper bowls. The slips are made to stand up to the most severe service. The self-centered, full wrap around grip holds positively while preventing damage to even thin walled casing. By varying the circular button size and adding or removing body segments, casing from 7 5/8" to 36" can easily be accommodated. The segments are made of alloy steel, are heat treated for strength and wear resistance, and machined to strict quality controlled standards.

Drilling Technologies > Pipe Handling Tools > Slips > UC-3 Casing Slip

The Baash-Ross style UC-3 Casing Slip provides the full circumferential grip necessary to handle the weight of most casing strings and the thin wall of the casing. The UC-3 Casing Slip has a 3" taper designed with a single liner per segment and a liner keeper assembly with bolt and washer for easy removal of the liner.

The UC-3 Casing Slip supports two different size segments to catch the range of casing from 9 5/8" to 42". The 10 3/4" UC-3 casing slip can be dressed down to 9 5/8" with reducing inserts and has a range of 10 3/4"-9 5/8?. The 11 3/4? - 42" size range is possible by adding or removing segments and changing inserts. The segments are made of alloy steel, are heat treated for strength and wear resistance, and machined to strict quality controlled standards.

Drilling Technologies > Pipe Handling Tools > Slips > DCS Drill Collar Slip

The Varco style DCS Drill Collar Slip provides superior holding power under all conditions. Each segment is manufactured of rugged material with an extra-long back to give maximum support to the circular buttons. The full, wrap around design compensates for irregularities and wear. The circular buttons hold against load applied from all directions, which assures positive holding and slip setting. The DCS Drill Collar Slips are flat on the top to accommodate all types of safety clamps.

Available Sizes:

  • DCS-2: 3" - 4 7/8"
  • DCS-R: 4 1/2" - 7"
  • DCS-L: 5 1/2 - 14"
Drilling Technologies > Pipe Handling Tools > Slips > C-1 Drill Collar Slip

The Baash-Ross Type C-1 Drill Collar Slip is a multi-segment slip design that allows the slip to hinge so that it fits all drill collars within the slip's range. The segments are made of selected heat treated alloy steel, and their light weight makes it easy for the crew to handle.

Available Sizes:

From To
3" 4 1/2"
4 1/2" 5 3/4"
5 1/2" 7"
6 3/4" 8 1/4"
8 1/2" 10"
10" 11 1/4"
11 1/4" 12 3/4"
Drilling Technologies > Pipe Handling Tools > Slips > Type A Drill Collar Slip

The Type A Drill Collar Slip has a multi-segment design which allows it to hinge so that it fits all drill collars within the slip's size range. The same renewable insert is used on all slips. The AOT Type A Slip Segments are made of alloy steel which is heat-treated for strength and wear resistance. Six different slip sizes fit drill collars from 3" through 10 " Outside Diameter.

Available Slip Sizes:

From To
3" 4 1/4"
3 1/2" 4 3/4"
4 1/4" 5 3/4"
5 1/2" 7"
6 3/4" 8 1/4"
8 1/4" 10"

Copyright © 2020 - LEAWOODUSA. ALL RIGHTS RESERVED. Designed and Hosted by Softlogue