Leawood USA
  • Address

    617503 Crooked Arrow Dr. Sugar Land, TX 77498

  • Phone

    346-332-7928

  • Address

    617503 Crooked Arrow Dr. Sugar Land, TX 77498

  • Phone

    346-332-7928

SAFETY CLAMPS

SAFETY CLAMPS

Drilling Technologies > Pipe Handling > Safety Clamps > Type C Safety Clamp

Type C Safety Clamp is one of the most valuable tools on the rig floor. It helps to prevent dropping flush joint pipe, streamlined drill collars, etc. into the hole while making up or breaking out the string. Type C Safety Clamps are ideal as an emergency elevator shoulder for lifting prepacked gravel liners, flush-joint pipe, twisted off fish and similar items which have no shoulder for attaching conventional elevators.

The Type C Safety Clamp consists of individual links, flexibly hinged together. Each link has a separate tapered segment which acts as a gripping member, much like a tapered rotary slip. Each segment is held in a retracted position on the taper by spring tension. When the clamp is tightened each segment takes a firm grip on the surface of the pipe. Should the pipe start to fall or should load increase occur against the segments, the tapered mounting cause each segment to wedge tighter against the surface of the pipe to increase the grip to lock the pipe against further movement. Gripping pressure is always uniform around the pipe so there is little danger of crushing thin- walled pipe or damaging the pipe surface. These clamps are quality, heat - treated steel and are constructed to API specifications.

(Size range 3-3/4" - 43" by adding are subtracting segments)

Drilling Technologies > Pipe Handling > Safety Clamps > Type T Safety Clamps

The Type T Safety Clamp is one of the most valuable tools on the rig floor. It helps to prevent dropping flush joint pipe etc. into the hole while making - up or breaking - out. The Type T Safety Clamp consists of individual links, flexibly hinged together. Each link has a separate tapered segment which acts as a gripping member, much like a tapered rotary slip. Each segment is held in a retracted position on the taper by spring tension. When the clamp is tightened each segment takes a firm grip on the surface of the pipe.

Should the pipe start to fall or should load increase occur against the segments, the tapered mounting cause each segment to wedge tighter against the surface of the pipe to increase the grip to lock the pipe against further movement. Gripping pressure is always uniform around the pipe so there is little danger of crushing thin - walled pipe or damaging the pipe surface. Type T Safety Clamps are quality, heat - treated steel and are constructed to API specifications.

(Size range 1-1/8" to 4-1/2" by adding or subtracting segments)

Drilling Technologies > Pipe Handling > Safety Clamps > AMP Safety Clamps

The AMP safety clamp provides safe handling of all types of flush joint pipe, liner and drill collars during make-up or breaking-out. The AMP clamp can be adapted to act as an elevator shoulder whenever necessary or fitted with lift eyes to handle large diameter pipe to provide a convenient and safe method of handling surface pipe, drilling risers and other types of large diameter tubular products during installation.

Available Sizes:

Type From To
AMPS 2 7/8" 5"
AMPR 4 1/2" 10 1/2"
AMPM 10 1/2" 15 7/8"
AMPL 15 7/8" 19 3/8"
AMPXL 19 3/8" 30 1/2"

Copyright © 2020 - LEAWOODUSA. ALL RIGHTS RESERVED. Designed and Hosted by Softlogue